The interchangeable pressure piece set is considered the optimal supplement for KUKKO pressure spindles with interchangeable tips. Combination results in six different application possibilities for individual adaptation on the shaft.
an interchangeable pressure pad with dual tip, a flat pressure pad, a concave pressure pad, a pressure pad with large tip, a pressure pad kit, a magnetic mini-LED light and special grease.
There is a large centering hole on the shaft journal. The thrust piece with a large tip is recommended here.
The shaft journal is rounded or the bearing mandrel is so large that the disk thrust piece does not lie flat. The concave thrust piece should be used.
The face of the shaft journal is flat. The disc thrust piece should be used. This is countersunk on the inside to accommodate small bearing arbors.
Spindle thrust piece and thrust pieces can be combined to support on different hollow shafts.
| Modular system: | Spindle thrust piece can be combined with thrust pieces |
| Duality: | Two-sided tip for smooth surfaces or centering |
| Spring washer: | Stabilizes tip in spindle and allows easy tip replacement |
| Universality: | Any mounting position can be covered |
| Non-destructive disassembly: | Gentle removal due to exchangeable tips. Only one compressive load occurs |
