Grease hydraulic spindle power
Minimal effort – Maximum performance
The hydraulic spindles of the 800 and 8-0 series are suitable for removing particularly tightly stuck bearings, gears and washers.
The self-contained hydraulics on the one hand make working much easier, and on the other hand they generate forces that are difficult to achieve with mechanical spindles.
Benefits
Make work easier: Hydraulics convert mechanical torques into maximum force.
Individual adaption: Spindle extensions enable quick adaption to a wide variety of adjustments.
Series 800
Hydraulic spindle with mechanical drive for removing particularly tightly stuck bearings, gears and washers.
Series 8-0
Long hydraulic spindle enables easy and controlled removal of particularly firmly stuck parts. Can be combined with the standard range of our pullers such as 20-2 and 20-20.
Need even more power? No problem!
With the additional hydraulic press of the 9 series,the pressure output of mechanical pulling devices is increased to the maximum.
The advantage here: The spindle does not have to be replaced.
Series 9
Additional hydraulic press to increase the pressure performance of mechanical pulling devices for particularly tightly stuck bearings, gears and washers.
