Series 20 - KUKKO

Description

Extended standard puller hook.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Mechanical pressure screw.
Milled thread treated with special coating.
Two-arm design for space-saving operation.

Can be installed on various pulling hooks and variable reach thanks to jaw extensions.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
Spindle head band prevents the wrench from slipping off.
Cross-beam, up to size -30, includes hexagonal profile for holding.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Hydraulic spindle series 8-0 for particularly tight parts, available from a particular puller size.
Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size.
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
Stability support from optional series 219 clamp.

Quality made in Germany.
Strong design, high performance and long service life.
Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
Safety label to ensure protection of intellectual property.
A tube of KUKKO special grease included for pressure spindle.
Product video on the product can be opened.

The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

metricimperial

	EAN4021176	mm	mm	mm	mm	Nm	t	kg	mm	mm
20-1-2	466311	30 - 90	200	70 - 140	17	80	4,5	1.985	10	31	2
20-1-25	914362	30 - 90	250	70 - 140	17	80	4,5	8.5	10	31	2
20-1-4	989643	30 - 90	400	70 - 140	17	80	4,5	3.13	10	31	2
20-10-2	466496	30 - 120	200	70 - 180	17	80	4,5	2.13	10	31	2
20-10-25	908682	30 - 120	250	70 - 180	17	80	4,5	2.405	10	31	2
20-10-4	989650	30 - 120	400	70 - 180	17	80	4,5	3.435	10	31	2
20-2-3	466564	40 - 160	300	100 - 220	22	150	6,0	4.38	9	40	2
20-20-3	466649	40 - 200	300	100 - 260	22	150	6,0	4.655	9	40	2
20-3-25	901188	65 - 250	250	180 - 340	27	300	8,5	7.52	20	67	2
20-3-3	466724	65 - 250	300	180 - 340	27	300	8,5	8.1	20	67	2
20-3-4	467066	65 - 250	400	180 - 340	27	300	8,5	9.075	20	67	2
20-3-5	467301	65 - 250	500	180 - 340	27	300	8,5	10.57	20	67	2
20-30-3	466809	65 - 350	300	180 - 440	27	300	8,5	5.52	20	67	2
20-30-4	467141	65 - 350	400	180 - 440	27	300	8,5	9.62	20	67	2
20-30-5	467486	65 - 350	500	180 - 440	27	300	8,5	10.875	20	67	2
20-4-3	466984	80 - 520	300	200 - 590	36	400	12,0	15.28	20	67	2
20-4-4	467226	80 - 520	400	200 - 590	36	400	12,0	16.79	20	67	2
20-4-5	467554	80 - 520	500	200 - 590	36	400	12,0	16.6	20	67	2
20-40-4	730641	80 - 650	400	200 - 710	36	400	12,0	17.67	20	67	2
20-40-5	731976	80 - 650	500	200 - 710	36	400	12,0	15.8	20	67	2

	EAN4021176	inch	inch	inch	US t	inch	inch
20-1-2	466311	1 3/16 - 3 1/2	7 7/8	2 3/4 - 5 1/2	4.5	3/8	1 1/4	2
20-1-25	914362	1 3/16 - 3 1/2	9 7/8	2 3/4 - 5 1/2	4.5	3/8	1 1/4	2
20-1-4	989643	1 3/16 - 3 1/2	15 3/4	2 3/4 - 5 1/2	4.5	3/8	1 1/4	2
20-10-2	466496	1 3/16 - 4 3/4	7 7/8	2 3/4 - 7 1/8	4.5	3/8	1 1/4	2
20-10-25	908682	1 3/16 - 4 3/4	9 7/8	2 3/4 - 7 1/8	4.5	3/8	1 1/4	2
20-10-4	989650	1 3/16 - 4 3/4	15 3/4	2 3/4 - 7 1/8	4.5	3/8	1 1/4	2
20-2-3	466564	1 5/8 - 6 3/8	11 7/8	3 7/8 - 8 5/8	6.5	3/8	1 5/8	2
20-20-3	466649	1 5/8 - 7 7/8	11 7/8	3 7/8 - 10 1/4	6.5	3/8	1 5/8	2
20-3-25	901188	2 5/8 - 9 7/8	9 7/8	7 1/8 - 13 3/8	9	3/4	2 5/8	2
20-3-3	466724	2 5/8 - 9 7/8	11 7/8	7 1/8 - 13 3/8	9	3/4	2 5/8	2
20-3-4	467066	2 5/8 - 9 7/8	15 3/4	7 1/8 - 13 3/8	9	3/4	2 5/8	2
20-3-5	467301	2 5/8 - 9 7/8	19 3/4	7 1/8 - 13 3/8	9	3/4	2 5/8	2
20-30-3	466809	2 5/8 - 13 3/4	11 7/8	7 1/8 - 17 3/8	9	3/4	2 5/8	2
20-30-4	467141	2 5/8 - 13 3/4	15 3/4	7 1/8 - 17 3/8	9	3/4	2 5/8	2
20-30-5	467486	2 5/8 - 13 3/4	19 3/4	7 1/8 - 17 3/8	9	3/4	2 5/8	2
20-4-3	466984	3 3/16 - 20 1/2	11 7/8	7 7/8 - 23	1	3/4	2 5/8	2
20-4-4	467226	3 3/16 - 20 1/2	15 3/4	7 7/8 - 23	1	3/4	2 5/8	2
20-4-5	467554	3 3/16 - 20 1/2	19 3/4	7 7/8 - 23	1	3/4	2 5/8	2
20-40-4	730641	3 3/16 - 25 5/8	15 3/4	7 7/8 - 28	1	3/4	2 5/8	2
20-40-5	731976	3 3/16 - 25 5/8	19 3/4	7 7/8 - 28	1	3/4	2 5/8	2