28-C
Set of slide hammer and counterstays for extracting ball bearings and dowel-pins
12 - 46mm
M12
M12 -M7; M12 - M10; M12 - 15-16G
M10
M3; M4; M5; M6; M8; M10; M12; M14; M16; M18
11.995kg
15/32 - 1 7/8inch
M12
M12 -M7; M12 - M10; M12 - 15-16G
M10
M3; M4; M5; M6; M8; M10; M12; M14; M16; M18
Technologies
Accessories
| G-22 | 3-K handle for slide hammers |
content
| 223-K | Set of parallel-key and dowel-pin extractors |
| 25-A | Set of bearing extracting tools |
| 21-1 | Internal extractor |
| 21-2 | Internal extractor |
| 21-3 | Internal extractor |
| 21-4 | Internal extractor |
| 21-5 | Internal extractor |
| 21-6 | Internal extractor |
| 22-1 | Counterstay |
| 22-2 | Counterstay |
| GE10-10 | Thread adapter M10 / M10 |
| GE12-10 | Thread adapter M12 / M10 |
| GE14-10 | Thread adapter M14 / M10 |
| GE16-10 | Thread adapter M16 / M10 |
| GE18-10 | Thread adapter M18 / M10 |
| GE3-10 | Thread adapter M3 / M10 |
| GE4-10 | Thread adapter M4 / M10 |
| GE5-10 | Thread adapter M5 / M10 |
| GE6-10 | Thread adapter M6 / M10 |
| GE8-10 | Thread adapter M8 / M10 |
| KS-22-01-GH | Slide hammers |
| VM12-10 | female adapter M12 / M10 |
| VM12-1516 | female adapter M12 / 15x16G |
can be used alternatively with
| 21-0 | Internal extractor |
| 21-00 | Internal extractor |
| 21-01 | Internal extractor |
| 21-02 | Internal extractor |
| 21-7 | Internal extractor |
| 21-8 | Internal extractor |
| 21-0-E | Internal extractor with segmented grasp edge |
| 21-00-E | Internal extractor with segmented grasp edge |
| 21-01-E | Internal extractor with segmented grasp edge |
| 21-1-E | Internal extractor with segmented grasp edge |
| 21-2-E | Internal extractor with segmented grasp edge |
| 21-3-E | Internal extractor with segmented grasp edge |
| 21-4-E | Internal extractor with segmented grasp edge |
| 21-5-E | Internal extractor with segmented grasp edge |
| 21-6-E | Internal extractor with segmented grasp edge |
| 21-7-E | Internal extractor with segmented grasp edge |