Industries
Description
- Standardized punch stamp in accordance with DIN 7353.
- Standardized type face in accordance with DIN 1451.
- Hardness of the engraving between 58 and 61 HRC.
- Side marking with font size, "Made in Germany" and the safety notice "Wear eye protection".
Advantage
- Particularly suited for marking stainless steel as the nickel-plated surface does not leave any additional rust behind unlike non-nickel-plated surfaces.
- Particularly long service life as the engraving is performed using a cold-forming process that does not disrupt the material's fiber flow.
- Packaged in our tried-and-tested, break-proof plastic case.
- A sharpened exposed edge to the side of the engraving improves accuracy.
- Better grip thanks to larger shaft.
- The larger shaft increases the weight and therefore makes it easier to drive the tool into the workpiece.
Functionality
- Steel numbers
- Sign and marking
Articles of this series
| EAN4021176 |  mm |  mm |  mm |  kg | |
|---|---|---|---|---|---|
| 330-001 | 4027474224868 | 1,0 | 6 | 65 | 0.245 |
| 330-0015 | 4027474031718 | 1,5 | 6 | 65 | 0.245 |
| 330-002 | 4027474626617 | 2,0 | 7 | 70 | 0.24 |
| 330-0025 | 4027474224875 | 2,5 | 7 | 70 | 0.245 |
| 330-003 | 4027474626792 | 3,0 | 7 | 70 | 0.26 |
| 330-004 | 4027474626877 | 4,0 | 8 | 70 | 0.3 |
| 330-005 | 4027474626952 | 5,0 | 9 | 70 | 0.42 |
| 330-006 | 4027474627034 | 6,0 | 10 | 75 | 0.54 |
| 330-007 | 4027474799106 | 7,0 | 10 | 75 | 0.54 |
| 330-008 | 4027474627119 | 8,0 | 12 | 80 | 0.84 |
| 330-010 | 4027474627294 | 10,0 | 14 | 80 | 1.1135 |
| 330-012 | 4027474627379 | 12,0 | 16 | 90 | 1.665 |
| 330-015 | 4027474627454 | 15,0 | 16 | 90 | 1.645 |
| 330-020 | 4027474627522 | 20,0 | 20 | 100 | 2.745 |