Industries
Description
- Standardized punch stamp in accordance with DIN 7353.
- Standardized type face in accordance with DIN 1451.
- Hardness of the engraving between 58 and 61 HRC.
- Side marking with font size, "Made in Germany" and the safety notice "Wear eye protection".
Advantage
- Particularly long service life as the engraving is performed using a cold-forming process that does not disrupt the material's fiber flow.
- Particularly suited for marking stainless steel as the nickel-plated surface does not leave any additional rust behind unlike non-nickel-plated surfaces.
- Packaged in our tried-and-tested, break-proof plastic case.
- A sharpened exposed edge to the side of the engraving improves accuracy.
- Better grip thanks to larger shaft.
- The larger shaft increases the weight and therefore makes it easier to drive the tool into the workpiece.
Functionality
- Marking letters
- Sign and marking
Articles of this series
| EAN4021176 |  mm |  mm |  mm |  kg | |
|---|---|---|---|---|---|
| 331-001 | 4027474917012 | 1,0 | 6 | 65 | 0.72 |
| 331-002 | 4027474627607 | 2,0 | 7 | 70 | 0.72 |
| 331-003 | 4027474627782 | 3,0 | 7 | 70 | 0.72 |
| 331-004 | 4027474627867 | 4 | 8 | 70 | 0.875 |
| 331-005 | 4027474627942 | 5,0 | 9 | 70 | 1.2 |
| 331-006 | 4027474628024 | 6,0 | 10 | 75 | 1.58 |
| 331-007 | 4027474911065 | 7,0 | 10 | 75 | 1.6 |
| 331-008 | 4027474628109 | 8,0 | 12 | 80 | 2.48 |
| 331-010 | 4027474628284 | 10,0 | 14 | 80 | 3.375 |
| 331-012 | 4027474628369 | 12,0 | 16 | 90 | 4.92 |
| 331-015 | 4027474628444 | 15,0 | 16 | 90 | 4.95 |
| 331-020 | 4027474628512 | 20,0 | 20 | 100 | 8.2 |