Industries
Technologies
Description
- With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed.
- Puller is self-tensioning and easy to handle.
- Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force.
- Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw.
- The proven KUKKO claw in a newly developed, modern jaw design.
- The two pulling jaw versions are color-coded for easier distinction.
- The pulling jaws are tempered for a long service life.
- The special cross-beam design ensures secure retention of the the part to be removed by the pulling jaws thanks to the spread adjuster.
- Mechanical pressure spindle.
- Rounded spindle head is used with the slide hammer as a spindle top.
- Milled thread treated with special coating.
- Instructions and conversion table in the cover.
- Secure storage in special foam.
Advantage
- Puller is self-tensioning and easy to handle.
- Simple, self-explanatory use with a small number of individual components.
- Simple mounting of the pulling jaws with 90° rotation in the cross-beam.
- Secure, form-fitting connection of the pulling jaws with the cross-beam.
- Only two pulling jaw types required.
- Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam.
- Magnets under the cross-beam ensure simple mounting of the support rings on the ball bearing.
- Spindle head band prevents the wrench from slipping off.
- Non-contact removal possible - in combination with a slide hammer.
Functionality
- Ball bearing removal
- Removing
- Set
Usage
Articles of this series
| EAN4021176 |  |  mm |  mm |  |  mm |  |  St. / pcs. |  mm |  |  mm |  kg | mm |  St. / pcs. |  mm | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| K-70-A | 058851 | 6000-6006; 6200-6205; 6300-6304 | 10 - 30 | 26 - 52 | 13 | 70 | 6 | 7 | 19 - 38 | 3 | 10 - 42 | 1.91 | - | - | - - - |
| K-70-B | 058868 | 6007-6020; 6206-6212; 6305-6311; 6403-6408 | 17 - 100 | 62 - 150 | - | 156 | 8 | 7 | 38 - 77,5 | - | - - - | 4.365 | 17 | 4 | 35 - 80 |
| K-70-C | 019999 | 6000-6020; 6200-6212; 6300-6311; 6403-6408 | 10 - 100 | 26 - 150 | - | 70; 156 | 14 | 13 | 19 - 77,5 | 3 | 10 - 42 | 7.125 | 13; 17 | 4 | 35 - 80 |