Series 0-S - KUKKO

Description

Adjustable depth thanks to jaw extensions, available up to a puller size of -30.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
As a replacement part or supplement to your Kukko puller.

Quality made in Germany.
Strong design, high performance and long service life.
Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).

Always replace defective pulling hooks in pairs.
The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

metricimperial

	EAN4021176	mm	mm	mm	mm	mm	mm	kg
1-90-S	001413	100	3	20	15	31	10	0.835
1-190-S	001741	200	3	20	15	31	10	1.685
1-250-S	002083	250	3	20	15	31	10	2.04
1-400-S	975684	400	3	20	15	31	10	3.48
2-150-S	002571	150	4	24	18	40	9	1.84
2-300-S	002816	300	4	24	18	40	9	3.78
3-200-S	003318	200	4	35	37	67	20	3.28
3-250-S	901249	250	4	35	37	67	20	2.08
3-300-S	003646	300	4	35	37	67	20	6.46
3-400-S	003981	400	4	35	37	67	20	8.05
3-500-S	004223	500	4	35	37	67	20	9.89

	EAN4021176	inch	inch	inch	inch	inch	inch
1-90-S	001413	3 7/8	1/8	3/4	5/8	1 1/4	3/8
1-190-S	001741	7 7/8	1/8	3/4	5/8	1 1/4	3/8
1-250-S	002083	9 7/8	1/8	3/4	5/8	1 1/4	3/8
1-400-S	975684	15 3/4	1/8	3/4	5/8	1 1/4	3/8
2-150-S	002571	5 7/8	3/16	7/8	3/4	1 5/8	3/8
2-300-S	002816	11 7/8	3/16	7/8	3/4	1 5/8	3/8
3-200-S	003318	7 7/8	3/16	1 3/8	1 1/2	2 5/8	3/4
3-250-S	901249	9 7/8	3/16	1 3/8	1 1/2	2 5/8	3/4
3-300-S	003646	11 7/8	3/16	1 3/8	1 1/2	2 5/8	3/4
3-400-S	003981	15 3/4	3/16	1 3/8	1 1/2	2 5/8	3/4
3-500-S	004223	19 3/4	3/16	1 3/8	1 1/2	2 5/8	3/4