Support
Solutions consultant

Do you have any questions? We will help you with your inquiries and will be happy to find the right solution together with you. Choose one of the following options:

Y28-218

Hydraulic push/pull device set

Data sheet
distance of side screw
135 - 300mm
depth of side screw
470mm
Tension bolt depth with hydraulics below the cross-beam
300mm
Diameter of the shaft
25 - 155mm
inner diameter of ball bearing
30 - 180mm
Maximum load as pulling device only with tension bolts
15t
Maximum load as pulling device with separator
15t
Maximum load as pulling device with internal extractor
10t
Maximum pressure
394bar
weight
60kg
distance of side screw
5 1/4 - 11 3/4inch
depth of side screw
18 1/2inch
Tension bolt depth with hydraulics below the cross-beam
12inch
Diameter of the shaft
1 - 6 1/8inch
Maximum load as pulling device only with tension bolts
16.5US t
Maximum load as pulling device with separator
16.5US t
Maximum load as pulling device with internal extractor
11.0US t
Maximum pressure
394bar
Technologies
Hydraulic technology

content

Y-221-EInternal extractors
YHP-325Hydraulic hand pump
Y-215-3Separator for hydraulic push/pull device
YDB-27EPressure pad for hollow rams
YRH-202Hydraulic hollow ram
Y20-180Push/pulling device (without hydraulic hollow ram for pump drive)
Y218-06-P240 mm tension bolts, pair
Y218-08-P570 mm tension bolts, pair
Y218-31-PPair of connectors for tension bolts
Y218-33Quick-adjust nuts
Y218-10Crank
Y218-11Mechanical screw

Usage

Share this page

Back to the series

Back

To the shops

Periwork