Series K-20-1+S-T-C

Universal 2-jaw puller with extensions, in set

For universal use when pulling off transmission gears, bearings, pinions and synchronizer bodies.

Description

This set allows for the assembly of four different puller models by combining standard and S/T hooks and extensions as required.
Optimized quick-adjustment design for high clamping force and excellent ease of use.
Two-arm design for space-saving operation.
KUKKO stem tip finished with TiN coating to increase hardness.
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Milled thread treated with special coating.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Instructions on the cover.
Secure storage in special foam.

The narrow, trapezoidal pulling jaws are suitable for extremely narrow, difficult to access places.
A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.
Pleasant to the touch due to the second soft component (Santoprene).
The TiN coating has excellent frictional qualities, allowing the stem tip to turn easily.
By turning the pulling hooks, the pullers can be used both externally and internally.
Suitable for pulling asymmetric workpieces.
2-arm cross bar with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Complete easy-to-manage package.

metricimperial

	EAN4021176	mm	mm	mm	t	Nm		kg
K-20-1+S-T-C	021480	90	100 - 200	17	2,5	35	35; 80	2.665

	EAN4021176	inch	inch
K-20-1+S-T-C	021480	3 1/2	3 7/8 - 7 7/8	35; 80