Series 11-A - KUKKO

Description

High performance is guaranteed.
Standard pulling hook.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Mechanical pressure screw.
Milled thread treated with special coating.
The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely.
If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.

Variable reach thanks to optional jaw extensions.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size.
Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option.
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.

Quality made in Germany.
Strong design, high performance and long service life.
Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
Safety label to ensure protection of intellectual property.
A tube of KUKKO special grease included for pressure spindle.
Product video on the product can be opened.

The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

metricimperial

	EAN4021176	mm	mm	mm	mm	t	Nm	kg	mm	mm
11-0-A	005886	170 - 375	200	220 - 500	36	15	500	17.99	20	67	3
11-0-A3	729263	170 - 375	300	220 - 500	36	15	500	19.5	20	67	3
11-0-A4	729348	170 - 375	400	220 - 500	36	15	500	18.6	20	67	3
11-0-A5	729423	170 - 375	500	220 - 500	36	15	500	22.78	20	67	3
11-1-A	075421	190 - 520	200	280 - 600	41	20	650	22.72	20	67	3
11-1-A3	729591	190 - 520	300	280 - 600	41	20	650	24.34	20	67	3
11-1-A4	729676	190 - 520	400	280 - 600	41	20	650	28	20	67	3
11-1-A5	729751	190 - 520	500	280 - 600	41	20	650	27.57	20	67	3
11-2-A	006203	220 - 650	200	290 - 740	41	20	650	25	20	67	3
11-2-A3	706158	220 - 650	300	290 - 740	41	20	650	26.25	20	67	3
11-2-A4	729836	220 - 650	400	290 - 740	41	20	650	26	20	67	3
11-2-A5	729911	220 - 650	500	290 - 740	41	20	650	27.6	20	67	3

	EAN4021176	inch	inch	inch	US t	ft lb	inch	inch
11-0-A	005886	6 3/4 - 14 3/4	7 7/8	8 5/8 - 19 3/4	16.5	68.5	3/4	2 5/8	3
11-0-A3	729263	6 3/4 - 14 3/4	11 7/8	8 5/8 - 19 3/4	16.5	68.5	3/4	2 5/8	3
11-0-A4	729348	6 3/4 - 14 3/4	15 3/4	8 5/8 - 19 3/4	16.5	68.5	3/4	2 5/8	3
11-0-A5	729423	6 3/4 - 14 3/4	19 3/4	8 5/8 - 19 3/4	16.5	68.5	3/4	2 5/8	3
11-1-A	075421	7 1/2 - 20 1/2	7 7/8	11 1/32 - 23 5/8	22	479.5	3/4	2 5/8	3
11-1-A3	729591	7 1/2 - 20 1/2	11 7/8	11 1/32 - 23 5/8	22	479.5	3/4	2 5/8	3
11-1-A4	729676	7 1/2 - 20 1/2	15 3/4	11 1/32 - 23 5/8	22	479.5	3/4	2 5/8	3
11-1-A5	729751	7 1/2 - 20 1/2	19 3/4	11 1/32 - 23 5/8	22	479.5	3/4	2 5/8	3
11-2-A	006203	8 5/8 - 25 5/8	7 7/8	11 3/8 - 29 1/8	22	479.5	3/4	2 5/8	3
11-2-A3	706158	8 5/8 - 25 5/8	11 7/8	11 3/8 - 29 1/8	22	479.5	3/4	2 5/8	3
11-2-A4	729836	8 5/8 - 25 5/8	15 3/4	11 3/8 - 29 1/8	22	479.5	3/4	2 5/8	3
11-2-A5	729911	8 5/8 - 25 5/8	19 3/4	11 3/8 - 29 1/8	22	479.5	3/4	2 5/8	3