- For use with series 15 and 17 separators.
- The pulling device can be combined with the series 18-0-AS screw adapter to remove parts with threaded holes.
- Mechanical pressure screw.
- Milled thread treated with special coating.
- Ultimate stability when removing, as the separator and pulling device are screwed firmly together.
- Almost all components available as replacement parts, time-saving order process thanks to numbering system.
KUKKO quality standards
- Quality made in Germany.
- Strong design, high performance and long service life.
- Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
- Safety label to ensure protection of intellectual property.
- A tube of KUKKO special grease included for pressure spindle.
- Product video on the product can be opened.
- Pulling device
- If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
- The separator blades' support surfaces must always sit fully beneath the part to be removed.
- Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
- Protective blanket required.
- Protective goggles required.
Articles of this series
|18-00||101939||25 - 100||M6||12||1,5||40||0.82||60|
|18-0||075599||50 - 110||M10||13||3||40||0.825||71 - 150|
|18-1||075674||60 - 150||M10||19||5||70||2.05||122 - 200|
|18-2||075759||68 - 244||M14x1,5||22||7||120||3.245||145 - 280|
|18-3||005961||80 - 300||M18x1,5||27||10||280||6.375||144 - 300|
|18-4||006043||120 - 380||G 5/8"||36||15||450||14.3||134 - 350|
|18-5||075834||150 - 440||G 3/4"||41||20||500||24.19||225 - 400|