Industries
Technologies
Description
- Grease hydraulics.
- Standard pulling hook.
- Parallel pulling hooks in every position, even with full load.
- Pulling hooks with infinitely variable adjustment on the cross-beam.
- Hydraulic and mechanical pressure screw.
- Milled thread treated with special coating.
- Two-arm design for space-saving operation.
Advantage
- Easy and even pulling for particularly tight parts.
- Variable reach thanks to jaw extensions, available up to a puller size of -30.
- Optional conversion to various jaw types for mechanical use.
- Turning the pulling hooks enables them to be used both internally and externally.
- Suitable for pulling asymmetric workpieces.
- Spindle head band prevents the wrench from slipping off.
- Cross-beam, up to size -30, includes hexagonal profile for holding.
- Almost all components available as replacement parts, time-saving order process thanks to numbering system.
- Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
KUKKO quality standards
- Quality made in Germany.
- Strong design, high performance and long service life.
- Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
- Safety label to ensure protection of intellectual property.
- A tube of KUKKO special grease included for pressure spindle.
- Product video on the product can be opened.
Functionality
- Pullers with sliding, parallel jaws
Safety information
- The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
- If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
- The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
- Observe max. torque.
- Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
- Protective blanket required.
- Protective goggles required.
Articles of this series
| EAN4021176 |  mm |  mm |  mm |  mm |  t |  kg |  mm |  mm |  | |
|---|---|---|---|---|---|---|---|---|---|---|
| 20-2-B | 885815 | 40 - 160 | 150 | 100 - 220 | 12; 22 | 7 | 4.52 | 9 | 40 | 2 |
| 20-20-B | 885846 | 40 - 200 | 150 | 100 - 260 | 12; 22 | 7 | 4.9 | 9 | 40 | 2 |
| 20-3-B | 885891 | 65 - 250 | 200 | 180 - 340 | 12; 27 | 10 | 9.525 | 20 | 67 | 2 |
| 20-30-B | 885945 | 65 - 350 | 200 | 180 - 440 | 12; 27 | 10 | 9.665 | 20 | 67 | 2 |
| 20-4-B | 885983 | 80 - 520 | 200 | 200 - 590 | 36 | 15 | 20 | 20 | 67 | 2 |
| 20-40-B | 886010 | 80 - 650 | 300 | 200 - 710 | 36 | 15 | 24.12 | 20 | 67 | 2 |