Series 30 - KUKKO

Description

Standard pulling hook.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Mechanical pressure screw.
Milled thread treated with special coating.
The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely.
If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.

Can be installed on various pulling hooks and variable reach thanks to jaw extensions.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Hydraulic spindle series 8-0 for particularly tight parts, available from a particular puller size.
Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size.
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.

Quality made in Germany.
Strong design, high performance and long service life.
Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
Safety label to ensure protection of intellectual property.
A tube of KUKKO special grease included for pressure spindle.
Product video on the product can be opened.

The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

metricimperial

	EAN4021176	mm	mm	mm	t	Nm	kg	mm	mm		mm
30-1	013393	27 - 90	70 - 140	17	6	80	1.53	10	31	3	100
30-10	013621	27 - 130	70 - 180	17	6	80	1.59	10	31	3	100
30-2	013478	35 - 160	100 - 220	22	7	150	3.815	9	40	3	150
30-20	013706	35 - 200	100 - 260	22	7	150	4.14	9	40	3	150
30-3	013546	46 - 250	180 - 340	27	10	250	9.615	20	67	3	200
30-30	303005	50 - 375	180 - 440	36	15	250	10.5	20	67	3	200
30-4	303302	170 - 375	200 - 590	36	15	500	17.88	20	67	3	200
30-40	303319	190 - 520	200 - 710	41	15	500	22.64	20	67	3	200
30-5	303326	220 - 650	290 - 740	41	20	650	31.71	20	67	3	300 - 500

	EAN4021176	inch	inch	US t	ft lb	inch	inch		inch
30-1	013393	1 1/16 - 3 1/2	2 3/4 - 5 1/2	6.5	59	3/8	1 1/4	3	3 7/8
30-10	013621	1 1/16 - 5 1/8	2 3/4 - 7 1/8	6.5	59	3/8	1 1/4	3	3 7/8
30-2	013478	1 3/8 - 6 3/8	3 7/8 - 8 5/8	7.5	110.5	3/8	1 5/8	3	5 7/8
30-20	013706	1 3/8 - 7 7/8	3 7/8 - 10 1/4	7.5	110.5	3/8	1 5/8	3	5 7/8
30-3	013546	1 7/8 - 9 7/8	7 1/8 - 13 3/8	11	184	3/4	2 5/8	3	7 7/8
30-30	303005	2 - 14 3/4	7 1/8 - 17 3/8	16	184	3/4	2 5/8	3	7 7/8
30-4	303302	6 3/4 - 14 3/4	7 7/8 - 23 1/4	16.5	68.5	3/4	2 5/8	3	7 7/8
30-40	303319	7 1/2 - 20 1/2	7 7/8 - 28	16.5	68.5	3/4	2 5/8	3	7 7/8
30-5	303326	8 5/8 - 25 5/8	11 3/8 - 29 1/8	22	479.5	3/4	2 5/8	3	11 7/8 - 19 3/4