Industries
Technologies
Description
- With this puller, grooved ball bearings that are simultaneously located on a shaft and in a casing can be quickly and easily removed.
- Puller is self-tensioning and easy to handle.
- Pulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force.
- Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw.
- The proven KUKKO claw in a newly developed, modern jaw design.
- The pulling jaws are tempered for a long service life.
- The special cross-beam design ensures secure retention of the the part to be removed by the pulling jaws thanks to the spread adjuster.
- Mechanical pressure spindle.
- Rounded spindle head is used with the slide hammer as a spindle top.
- Milled thread treated with special coating.
Advantage
- Puller is self-tensioning and easy to handle.
- Simple mounting of the pulling jaws with 90° rotation in the cross-beam.
- Secure, form-fitting connection of the pulling jaws with the cross-beam.
- Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam.
- Magnets under the cross-beam ensure simple mounting of the support rings on the ball bearing.
- Non-contact removal possible - in combination with a slide hammer.
Functionality
- Removing
- Ball bearing removal
Articles of this series
EAN4021176 | mm | mm | mm | mm | kg | |||
---|---|---|---|---|---|---|---|---|
70-01-011-C | 021404 | 6000-6004; 6200-6202; 6301 | 10 - 20 | 26 - 42 | 13 | 70 | 3 | 0.5 |
70-01-012-C | 021428 | 6005-6006; 6203-6300; 6302-6304 | 10 - 30 | 40 - 55 | 13 | 70 | 3 | 0.505 |
70-02-021-C | 021442 | 6007-6013; 6206-6211; 6306-6307 | 35 - 65 | 62 - 88,8 | 17 | 156 | 4 | 1.94 |
70-02-022-C | 021466 | 6014-6020; 6207-6212; 6308-6311; 6403-6408 | 17 - 100 | 62 - 150 | 17 | 156 | 4 | 1.95 |