Series K-20+17

Description

This set allows for the construction and combination of 2-jaw pullers and separating pullers.
Optimized quick-adjustment design for high clamping force and excellent ease of use.
Two-arm design for space-saving operation.
Separators with quick clamping pressure spindle
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Milled thread treated with special coating.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Instructions on the cover.
In the approved KUKKO-L-Boxx system. With a new front handle for superior portability.
Secure storage in special foam.
The sharp blades enable flush parts to be removed where pulling jaws cannot be used.
The large supporting surfaces protect the parts to be pulled.

Practical package for universal use.
A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-arm cross bar with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Complete easy-to-manage package.

metricimperial

	EAN4021176	mm	mm	mm	mm	t		kg
K-20+17	773877	160	150 - 300	22	12 - 115	6	150	12.36

	EAN4021176	inch	inch	inch	inch
K-20+17	773877	6 3/8	5 7/8 - 11 13/16	7/8	1/2 - 4 1/2	150