Series 0-P - KUKKO

Description

Variable reach thanks to jaw extensions, available up to a puller size of -30.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
As a replacement part or supplement to your Kukko puller.

Quality made in Germany.
Strong design, high performance and long service life.
Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).

Always replace defective pulling hooks in pairs.
The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.

metricimperial

	EAN4021176	mm	mm	mm	mm	mm	mm	kg
1-90-P	001338	100	3,0	20	15	31	10	0.555
1-190-P	001666	200	3,0	20	15	31	10	1.12
1-250-P	001901	250	3,0	20	15	31	10	1.36
1-400-P	975660	400	3,0	20	15	31	10	2.12
2-150-P	002403	150	4,0	24	18	40	9	1.24
2-300-P	002731	300	4,0	24	18	40	9	2.4
3-200-P	003233	200	4,0	35	37	67	20	3.27
3-250-P	901232	250	4,0	35	37	67	20	3.725
3-300-P	003561	300	4,0	35	37	67	20	4.26
3-400-P	003806	400	4,0	35	37	67	20	5.33
3-500-P	004148	500	4,0	35	37	67	20	6.7

	EAN4021176	inch	inch	inch	inch	inch	inch
1-90-P	001338	3 7/8	1/8	3/4	5/8	1 1/4	3/8
1-190-P	001666	7 7/8	1/8	3/4	5/8	1 1/4	3/8
1-250-P	001901	9 7/8	1/8	3/4	5/8	1 1/4	3/8
1-400-P	975660	15 3/4	1/8	3/4	5/8	1 1/4	3/8
2-150-P	002403	5 7/8	3/16	7/8	3/4	1 5/8	3/8
2-300-P	002731	11 7/8	3/16	7/8	3/4	1 5/8	3/8
3-200-P	003233	7 7/8	3/16	1 3/8	1 1/2	2 5/8	3/4
3-250-P	901232	9 7/8	3/16	1 3/8	1 1/2	2 5/8	3/4
3-300-P	003561	11 7/8	3/16	1 3/8	1 1/2	2 5/8	3/4
3-400-P	003806	15 3/4	3/16	1 3/8	1 1/2	2 5/8	3/4
3-500-P	004148	19 3/4	3/16	1 3/8	1 1/2	2 5/8	3/4