Industries
Technologies
Description
- Thin pulling hooks in various lengths.
- Pulling hooks with infinitely variable adjustment on the cross-beam.
- Pulling hook with sliding part only available in pair of 2.
Advantage
- Variable reach thanks to jaw extensions, available up to a puller size of -30.
- Turning the pulling hooks enables them to be used both internally and externally.
- Suitable for pulling asymmetric workpieces.
- As a replacement part or supplement to your Kukko puller.
KUKKO quality standards
- Quality made in Germany.
- Strong design, high performance and long service life.
- Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
Functionality
- Accessories for External pulling
- Pulling hooks.
- Accessories
Safety information
- Always replace defective pulling hooks in pairs.
- The pulling hooks' sliding parts must always sit stably and fully on the cross-beam.
- If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
- The pulling hooks' support surfaces must always be straight and sit fully beneath the part to be removed.
- Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
- Protective blanket required.
- Protective goggles required.
Articles of this series
EAN4021176 | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | |
---|---|---|---|---|---|---|---|
1-91-P | 434716 | 100 | 3 | 30 | 7 | 14 | 0.515 |
1-191-P | 461286 | 200 | 3 | 30 | 7 | 14 | 1.075 |
1-251-P | 461446 | 250 | 3 | 30 | 7 | 14 | 1.305 |
1-401-P | 985010 | 400 | 3 | 30 | 7 | 14 | 2.075 |
2-151-P | 702921 | 150 | 4,0 | 32 | 8 | 19 | 1.205 |
2-301-P | 703188 | 300 | 4,0 | 32 | 8 | 19 | 2.535 |
3-201-P | 726521 | 200 | 6,5 | 35 | 17 | 52 | 3.175 |
3-301-P | 726781 | 300 | 6,5 | 35 | 17 | 52 | 4.28 |
3-401-P | 726941 | 400 | 6,5 | 35 | 17 | 52 | 5.89 |
3-501-P | 727108 | 500 | 6,5 | 35 | 17 | 52 | 6.555 |