27-A
Universal puller set
8 - 48mm
50 - 60mm
M12
M12 - 1516G; M12 - M10
7.255kg
3/8 - 1 7/8inch
3/8 - 1.15/18inch
M12
M12 - 1516G; M12 - M10
Technologies
Spare part
| 204-0 | 2-jaw bearing puller "Cobra" with separating claw and side clamp |
| 204-0-70-P | 2 pulling jaws (pair) |
| 204-0-T | Cross-beam |
| 21-01-E | Internal extractor with segmented grasp edge |
| 21-1-E | Internal extractor with segmented grasp edge |
| 21-2-E | Internal extractor with segmented grasp edge |
| 21-3-E | Internal extractor with segmented grasp edge |
| 21-4-E | Internal extractor with segmented grasp edge |
| 21-5-E | Internal extractor with segmented grasp edge |
| 43-001 | Small part puller |
| 43-001-50-P | 2 pulling jaws (pair) |
| 43-1-206 | Mechanical pressure spindle. |
| 43-1-T | Cross-beam |
| 610094 | Mechanical pressure spindle. |
| 22-01-G27-A | Slide hammer with adapter M10 |
content
| 204-0 | 2-jaw bearing puller "Cobra" with separating claw and side clamp |
| 21-0-E | Internal extractor with segmented grasp edge |
| 21-00-E | Internal extractor with segmented grasp edge |
| 21-01-E | Internal extractor with segmented grasp edge |
| 21-1-E | Internal extractor with segmented grasp edge |
| 21-2-E | Internal extractor with segmented grasp edge |
| 21-3-E | Internal extractor with segmented grasp edge |
| 21-4-E | Internal extractor with segmented grasp edge |
| 21-5-E | Internal extractor with segmented grasp edge |
| 43-001 | Small part puller |
| 69-1 | Ball bearing puller |
| 69-A2 | Adapter (pair) 5,8 mm |
| 69-A3 | Adapter (pair) 8 mm |
| 22-01-G27-A | Slide hammer with adapter M10 |
| GA12-3 | Adapter M12 / M3 |
| GA12-4 | Adapter M12 / M4 |
| GA12-5 | Adapter M12 / M5 |
| GA12-6 | Adapter M12 / M6 |
| GA12-8 | Adapter M12 / M8 |
| GA12-10 | Adapter M12 / M10 |
| VM12-1516 | female adapter M12 / 15x16G |
| 21-44-E | Needle bearing extractors |
| KS-22-01-GH | Slide hammers |