Support
Solutions consultant

Do you have any questions? We will help you with your inquiries and will be happy to find the right solution together with you. Choose one of the following options:

K-70-C

"PULLPO" ball bearing puller set

Data sheet
ball bearing ISO
6000-6020; 6200-6212; 6300-6311; 6403-6408
inner diameter of ball bearing
10 - 100mm
outer diameter of ball bearing
26 - 150mm
hexagon drive (male)
13; 17mm
K-70 jaw length
70; 156mm
number of rings
13St. / pcs.
Number of jaws
14
Diameter of support ring
19 - 77,5mm
Counter-pressure pad for extraction of ball bearing with hollow shaft.
3
Counter-pressure pad for extraction of ball bearing with hollow shaft.
10 - 42mm
Number of counter-pressure pads
4St. / pcs.
Diameter of counter-pressure pads
35 - 80mm
weight
7.125kg
ball bearing ISO
6000-6020; 6200-6212; 6300-6311; 6403-6408
inner diameter of ball bearing
3/8 - 3 7/8inch
outer diameter of ball bearing
1 1/32 - 5 7/8inch
K-70 jaw length
2 3/4; 6 3/16inch
number of rings
13St. / pcs.
Number of jaws
14
Diameter of support ring
3/4 - 3 1/16inch
Counter-pressure pad for extraction of ball bearing with hollow shaft.
3
Counter-pressure pad for extraction of ball bearing with hollow shaft.
3/8 - 1 5/8inch
Number of counter-pressure pads
4St. / pcs.
Diameter of counter-pressure pads
1 3/8 - 3 3/16inch
Technologies
Pullpo technology

Spare part

70-01-TCross-beam
70-02-TCross-beam
70-0113 narrow replacement jaws without rings
70-0123 wide replacement jaws without rings
70-0214 narrow replacement jaws without rings
70-0224 wide replacement jaws without rings
610120Spindle
614242Spindle
70-01-RComplete ring set
70-02-RComplete ring set
700117Small pressure pads
700217Large pressure pads
70-021-S4 narrow replacement jaws with rings (red)

Accessories

22-0-1Slide hammer device
GA1415-12Threaded adapters (IG + AG)
G-223-K handle for slide hammers

part of

EVLW-2-INDUSTRIEDisplay

Usage

Share this page

Back to the series

Back

To the shops

Periwork