Support
Solutions consultant

Do you have any questions? We will help you with your inquiries and will be happy to find the right solution together with you. Choose one of the following options:

Y38-318

Hydraulic push/pull device set

Data sheet
distance of side screw
180 - 420mm
depth of side screw
520mm
Tension bolt depth with hydraulics below the cross-beam
330mm
Diameter of the shaft
30 - 250mm
inner diameter of ball bearing
75 - 230mm
Maximum load as pulling device only with tension bolts
25t
Maximum load as pulling device with separator
20t
Maximum load as pulling device with internal extractor
20t
Maximum pressure
514bar
weight
115kg
distance of side screw
7 - 16 1/4inch
depth of side screw
20 1/2inch
Tension bolt depth with hydraulics below the cross-beam
13inch
Diameter of the shaft
1 3/16 - 9 7/8inch
Maximum load as pulling device only with tension bolts
27.5US t
Maximum load as pulling device with separator
22.0US t
Maximum load as pulling device with internal extractor
22.0US t
Maximum pressure
514bar
Technologies
Hydraulic technology

content

Y-321-EInternal extractors
YHP-325Hydraulic hand pump
Y-315-5Separator for hydraulic push/pull device
YDB-33EPressure pad for hollow rams
YRH-302Hydraulic hollow ram
Y30-180Push/pulling device (without hydraulic hollow ram for pump drive)
Y318-36-P205 mm tension bolts, pair
Y318-33Quick-adjust nuts
Y318-38-P710 mm tension bolts, pair
Y318-41-PPair of connectors for tension bolts
Y318-10Crank
Y318-11Mechanical screw
Share this page

Back to the series

Back

To the shops

Periwork