Support
Solutions consultant

Do you have any questions? We will help you with your inquiries and will be happy to find the right solution together with you. Choose one of the following options:

Y58-518

Hydraulic push/pull device set

Data sheet
distance of side screw
235 - 540mm
depth of side screw
660mm
Tension bolt depth with hydraulics below the cross-beam
400mm
Diameter of the shaft
75 - 330mm
inner diameter of ball bearing
75 - 230mm
Maximum load as pulling device only with tension bolts
35t
Maximum load as pulling device with separator
30t
Maximum load as pulling device with internal extractor
25t
Maximum pressure
348bar
weight
220kg
distance of side screw
9 1/4 - 21inch
depth of side screw
26inch
Tension bolt depth with hydraulics below the cross-beam
16inch
Diameter of the shaft
3inch
Maximum load as pulling device only with tension bolts
38.6US t
Maximum load as pulling device with separator
33.0US t
Maximum load as pulling device with internal extractor
27.5US t
Maximum pressure
348bar
Technologies
Hydraulic technology

content

Y-521-EInternal extractors
YHP-325Hydraulic hand pump
Y-515-6Separator for hydraulic push/pull device
YDB-55EPressure pad for hollow rams
YRH-603Hydraulic hollow ram
Y50-180Push/pulling device (without hydraulic hollow ram for pump drive)
Y518-08-P865 mm tension bolts, pair
Y518-31-PPair of connectors for tension bolts
Y518-33Quick-adjust nuts
Y518-10Crank
Y518-11Mechanical screw
Share this page

Back to the series

Back

To the shops

Periwork